CLEANING INSTRUCTIONS FOR FIAT STEAM GENERATOR

  1. Turn water supply off.
  2. Turn electricity or breaker off.
  3. Remove access panel.
  4. Remove drain plug to remove water from tank to floor drain or bucket.
  5. Re-open the water supply to flush unit for few minutes.
  6. Turn water supply off.
  7. Re-install drain plug.
  8. Turn water supply on, wait until unit is full.
  9. Replace access panel.
  10. Turn electricity on, run a 30 minute cycle for test.

Recommended cleaning should be performed a minimum of twice per year or per local water conditions.

For other maintenance, please call your local service representative.

Dependability... at an affordable price!

255 Hutchings Street, Winnipeg, MB R2X 2R4
Phone 1-204-633-6122 or 1-800-665-7531 Fax 1-2040-632-4854
Email info@fiat.ca